Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

The newton filtration and d-determination of bifurcation problems related to C 0 contact equivalence

In this paper, from the Newton filtration’s point of view, we construct the singular Riemannian metric and use the method in singular theory to study the bifurcation problems, and give the sufficient condition of d-determination of bifurcation problems with respect to C ⁰ contact equivalence. The special cases of the main result in this paper are the results of Sun Weizhi and Zou Jiancheng.     

Establishment of hybrid-derived offspring populations in the Ohomopterus ground beetles through unidirectional hybridization

An approach to deduce the mechanism of stabilization of the hybrid-derived populations in the Ohomopterus ground beetles has been made by comparative studies on the phylogenetic trees of the mitochondrial and nuclear DNA. A phylogenetic tree based on the internal transcribed spacer (ITS) of nuclear ribosomal gene roughly reflects the relations of morphological species group, while mitochondrial NADH dehydrogenase subunit 5 (ND5) gene shows a considerable different topology on the tree; there exist several geographically-linked lineages, most of which consist of more than one species. These results suggest that the replacement of mitochondria has occurred widely in the Ohomopterus species. In most cases, hybridization is unidirectional, i.e., the species A (♂) hybridized with another species B (♀) and not vice versa, with accompanied replacement of mitochondria of A by those of B. The results also suggest that partial or complete occupation of the distribution territory by a hybrid-derived morphological species. The morphological appearance of the resultant hybrid-derivatives are recognized as that of the original species A. Emergence of a morphological new species from a hybrid-derived population has been exemplified.     

Model and empirical study on some collaboration networks

In this paper we present an empirical study of a few practical systems described by cooperation networks, and propose a model to understand the results obtained. We study four non-social systems, which are the Bus Route Networks of Beijing and Yangzhou, the Travel Route Network of China, Huai-Yang recipes of Chinese cooked food, and a social system, which is the Collaboration Network of Hollywood Actors. In order to explain the results related to the degree distribution, act-degree distribution and act-size distribution (especially about the degree distribution, which may be better fitted using a stretched exponential distribution (SED)), we suggest a simple model to show a possible evolutionary mechanism for the emergence of such networks. The analytic and numerical results obtained from the model are in good agreement with the empirical results.     

Investigation of the Doughnut Effect in Cy3-Labeled Protein Microarrays using Scanning Near-Field Optical Microscope

We demonstrate the fluorescence mapping of protein microarrays by the technique of scanning near-field optical microscopy (SNOM) and confocal microscopy. Micron sized spots (300 μm) of human Immunoglobulin G (hIgG) protein with and without a Cy3 dye labeling have been fabricated on glass substrates by an immobilization method which makes use of calixcrown derivatives termed Prolinker. We have also tried to probe into the well-known “doughnut effect” observed in fluorescence images of proteins using the SNOM technique. The topographic and fluorescence SNOM images revealed that the number of proteins at the boundary of the spot were more than at the center in the case of the microarray spot which showed brighter luminescence at the edge than at the center in the confocal image.     

LIMITING BEHAVIOR OF UNIFORM RECURSIVE TREES

The authors consider the limiting behavior of various branches in a uniform recursive tree with size growing to infinity.The limiting distribution ofζ_(n,m),the number of branches with size m in a uniform recursive tree of order n,converges weakly to a Poisson distribution with parameter 1/m with convergence of all moments.The size of any large branch tends to infinity almost surely.     

受激布里渊散射相位共轭现象的二维数值模拟

 使用P.H.Hu等人[3，4]提出的计算途径，数值解了A.Flusberg等人[2]提出的零级方程。计算了布里渊池内随位置而变化的斯托克斯光强度、泵浦光强度和保真度，得到了布里渊池内几个位置上的斯托克斯光相位和强度的横向分布，并计算了泵浦光入口处的反射率和保真度。     

Sr1-xLaxTiO3的高温高压合成及XPS研究

 利用高温高压方法合成了有稀土元素La掺杂的钙钛矿氧化物Sr_1-xLa_xTiO₃。XRD测试表明，在x≤0.5时，样品基本为单相，呈立方相；晶胞体积随x的增加而增加，在x=0.4时开始减小。XPS测量发现，样品中存在Ti离子的变价。讨论了Ti离子价态的变化对晶格参数的影响。     

对薄层柱壳爆炸膨胀断裂过程的研究

 本文提出了一个用于描述动态破坏发展过程的损伤度函数。从这个损伤度函数出发,把材料特征性方程取为强化粘塑性本构方程形式,导出了薄层柱壳爆炸膨胀运动在两种近似下（恒定膨胀速度近似合恒定应变速率近似）断裂判据的解析表达式。结果分析表明,在上述条件下,存在着一个动态断裂“塑性峰”,在这个峰值条件的应变率下,柱壳出现贯穿断裂时刻的应变最大。以软钢为算例,本断裂判据可以比较好地解释Иванов和陈大年等给出的实验结果。这时,动态断裂“塑性峰”对应的应变率为4×10⁴ s^-1,相应的应变约为60%~80%。